MG loop in batten lamp holder has a home office designed skirt. All the material is thermoset, which can withstand high temperature as 200 degrees. The holder is made according to BSEN 61184. The polar white color is glossy under light..
Number of terminals
1. Before installation ensure that the voltage supply is disconnected.
2. Connect ZW31 module as shown on above diagram.
3. Connect the device in accordance with the wiring diagram presented in Wiring diagram. Switch on 120V of the mains voltage.
4. For "Add" in a network: Put the Z-wave interface controller into "Add" mode, and following its instruction to add the ZW52 to your controller. To get in the "Add" mode, the distance between ZW31 module and controller is suggested to be in one meter. Quickly pressing the learn switch of ZW31 for 1 second at least & release to be included.
5. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW31 from your controller. Press the learn switch of ZW31 for 1 second at least &release to be excluded.
Q1: How long can I expect to get the sample
A1: After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-5 days. The samples will be sent to you via express and arrived in 5-7 days.
Q2: What about the lead time for mass production?
A2: Honestly, it depends on the order quantity and the season you place the order. The best record we keep is delivering. Generally speaking, we suggest that you start inquiry 30 to 40 days before the date you would like to get the products at your country.